Model - labworldsoft
- Eases life in the laboratory.
- With this laboratory software, you can network up to 64 laboratory devices simultaneously via one PC.
- That makes the automation of your laboratory experiments and processes possible.
- Measurements and processes may be run independently from one another.
- This helps to avoid long waits and you increase your productivity.
- The communication between PC and laboratory device is performed via the serial interface RS 232 (COM1 or COM2).
- With the help of plug-in cards and Ethernet RS 232 servers, up to 64 laboratory devices can be used simultaneously via one PC.
- All laboratory instruments can be controlled independently from each other and the measured values (speed, temperature, torque, pH, etc.) can be
documented separately.
- Hard- and software requirements:
- Pentium 90 with at least 16 MB RAM, and a mouse. VGA display: monochrome with at least 16 levels of grey or color.
- Windows 95/98/2000/NT/ME/XP...
- Networking, monitoring
- With labworldsoft® you can network up to 64 laboratory instruments simultaneously via one PC.
- From sample preparation to synthesis, all steps of research and development in the lab can be automated using labworldsoft®.
- Controlling
- Desired temperature and speed sequences can be precisely controlled by means of freely selectable ramp functions.
- The ramp functions can be graphically generated, stored, and then loaded again at any time.
- Recording, evaluating
- labworldsoft® enables a fast and easy recording of many physical parameters which are required in the laboratory, such as pH, conductivity
temperature, torque, weight, pump rates etc.
- Exporting
- Data acquired in labworldsoft® can be exported into standard applications.
- For example it is possible to measure the speed during a test, save the data in a standard format (.txt or ASCII) and analyze in any chart calculation, i.e.
Excel.
- Storing / reproducing measured data
- Do your test arrangements repeat themselves? With labworldsoft® all test arrangements can be stored.
- The stored data is available to reproduce the test, at a mouse click.
- The reproductability of tests is warranted within the scope of ISO 9000 and within GLP.
- Documentation
- For documentation purposes, all measuring results as well as the measurement flowcharts can be printed or plotted according to GLP, ISO and QA.
- For technical support please use our European service hotline at +49-7633-831-0 or send an email to
sales@ika.de.
Model - C 5040 CalWin
- PC control and evaluation software for all IKA® calorimeters (C 200, C 2000, C 5000, C 7000, C 4000).requires a PC running any of the
following operating systems:
- Windows 95 / 98 / ME / NT / 2000 or XP, and at least one free serial interface and 50 MB of available disk space.
- Control, monitor and view working procedures
- Print and save measurement protocols
- Identify and record samples
- Administration of sample racks C 5020
- Flexible administration and evaluation of calibrations
- Flexible administration and grouping of measurements
- Printing and saving calibration and result protocols suitable for certification
- Library functions
- Data transfer through COM to EXCEL and ACCESS
- Preprocessed work sheets for EXCEL (configarable by the user) consisting of: C 5040 CalWin C 5041.10 conecting cable.
IKA India - Laboratory Software
