- Homogeneous binder distribution.
- Short batch time and reduce cleaning time.
- Maximize CIP effectiveness.
- Air purge sealing system for main stirrer shaft and granulator shaft.
- All internal contact parts are polished to the mirror finish. - PLC based operating panel for precise control of process & automation.
- A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required

  size.
- The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes.
- Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning.
- All moving part of the machine are totally enclosed to eliminate accident.
- The machine can not be started unless and until the mixer cover is properly closed.
- All contact parts are made out of SS304. SS316 provided on demand on extra cost.
- Flush wall type discharge valve eliminates pockets at the port of discharge valve.
- Flameproof motors with flameproof operating panel.
- Discharge provided on left or right side( as per granulation room layout)to suit client's requirement.
- IPC LIFTER or VACUUM LOADING SYSTEM for dust free material charging.
- General Structure made out of completely from SS304 material instead of SS304 cladding on mild steel structure.
- Water jacketed product container with temperature sensor for product.
- A.C. Frequency Drive for speed variation of Main Motor & Granulator Motor.
- Pneumatic system for opening and closing of the top lid.
- Triclover ended connection on top cover for fitting of spray ball for inbuilt cleaning.
- Triclover ended connection on top cover for fitting of spray nozzle for spray of binders.

   

Optional
        
- Flameproof motor with flameproof operating panel.
- Discharge provided on left or right side ( as per customer requirement.
- Jacketed container for circulation of hot or cold water, with temperature sensing port for product. Jacket made out of SS304 & insulated with SS304.
- PLC based power panel with touch screen based operating panel for process automation.
- A. C. Frequency drive ( VFD ) for both motor variable speed of stirrer & granulator.
- Binder preparation vessel with spray system.
- Container with T/C end joint to collect the material from machine.
- Inspection light lamp facility.
     
Special Features
    
- Pneumatically operated ( non rotating type ) material discharge valve.
- Castor wheel mounted mobile unit for easy handling.
- Top cover with facility of light glass, sight glass & filter mounting port.
- Stainless steel air receiver.
- 0.3 micron air filter for compressed air.
- Granulator with U shape ( 02 nos. ) & knife edge blades ( 08 nos.) options.